This product has one of the highest satisfaction ratings by plumbers and contractors for cleaning laterals and smaller sewer lines. It is regarded as especially useful in preparations for lining or rehab work. "It is expensive but worth every penny".
- Up to 4k psi (275 bar)
- 5-12 gpm Flows (20-45 l/min)
- 3”- 6” Lines (76-152 mm)
- Classic Workhorse Model
US Pat. No. 5,964,414
Clean 3″- 6″ Lines with Elbows
Our smaller Warthog® sewer models have all the powerful features of the larger tools, but can negotiate elbows and clean-outs commonly found in laterals from homes, buildings, restaurants and other light commercial facilities. The WT-3/8-C™ is designed specifically to handle 3″ – 6″ lines and clean-outs. This tool is most commonly used on small capacity pumps and cart jetters.
We’ve added permanent carbide buttons to the WT-3/8-C™ model, specifically designed to handle demanding applications. Pipes made of cast iron and those that have sand or silt can act as abrasive agents that can aggressively wear out the tool. Our carbide buttons are available in all offsets and add up to 5 times the life compared to previous WT-3/8™ models.
The WT-3/8-C™ features a 3/8 npt or BSPP inlet port.
- WT-3/8-C™ Specifications
- Maximum Pressure 4k psi (275 bar)
- Operating Pressure 1,500k-4k psi (100-275 bar)
- Rotation Speed 300-500
- Flow 5-12 gpm (20-45 l/min)
- Flow Rating 0.75 Cv
- Pulling Force 5-20 lb (22-90 N)
- Inlet Port 1/4 NPT or BSPP
- Tool Diameter 1.9 in. (48 mm)
- Length 3.0 in. (76 mm)
- Nozzle Ports 3 x 1/8 NPT
- Weight Complete 1.2 lb (.54 kg)